Archives: Products
Showing 865–880 of 23773 results
-
1/16″-3/4″ TRADITIONAL TAP WRENCH SET 2-PCERp491.000Add to cartKennedy Engineerâs Tap Wrench Set
With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.
Tap Wrench Set
Contents:
Square size: 2.8 – 5mm and 4.3 – 14mm. -
1/16″-3/8″ HEXAGON WRENCH SET (10-PCE)Read moreKennedy Hexagon Key Walleted Sets
Metric – 9 Piece
Set Contents:
1.5 x 45, 2 x 50, 2.5 x 56, 3 x 63, 4 x 70, 5 x 79, 6 x 90, 8 x 100 and 10 x 112mm.Inch – 10 Piece
Set Contents:
1/16â x 1 3/4â, 5/64â x 1 7/8â, 3/32â x 2â, 1/8â x 2 1/4â, 5/32â x 2 1/2â, 3/16â x 2 3/4â, 7/32â x 3â, 1/4â x 3 1/4â, 5/16â x 3 3/4â and 3/8â x 4 1/4â. -
1/16″-3/8″ LONG ARM HEXAGON WRENCH SET (10-PCE)Read moreKennedy Hexagon Key L-Wrenches, Long Arm – Inch Set
Inch 10 Piece Long Arm Set
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.
Contents: 1/16â x 3â, 5/64â x 3 3/16â, 3/32â x 3 1/2â, 1/8â x 3 3/4â, 5/32â x 4 1/8â, 3/16â x 4 1/2â, 7/32â x 4 7/8â, 1/4â x 5 5/16â, 5/16â x 6â, and 3/8â x 6 3/4â. -
1/16″x27 NPT HSS GT STR. FLUTE PLUG TAPRp271.000Read moreNPTF (National Pipe Taper Fuel) HSS Ground Thread Taps
ANSIâ94.9
Straight Flute -
1/16″x27 NPTF HSS GT STR.FLUTE PLUG TAPRead moreNPTF (National Pipe Taper Fuel) HSS Ground Thread Taps
ANSIâ94.9
Straight Flute -
1/2 SHEET SANDING SHEETSGRIT P120-FINERead moreKennedy Sanding Sheets
Industrial aluminium oxide sanding paper is “glue” bonded and suitable for use with hand sanding blocks and orbital sanders.
-
1/2 SHEET SANDING SHEETSGRIT P50-COARSERead moreKennedy Sanding Sheets
Industrial aluminium oxide sanding paper is “glue” bonded and suitable for use with hand sanding blocks and orbital sanders.
-
1/2 SHEET SANDING SHEETSGRIT P80-MEDIUMRead moreKennedy Sanding Sheets
Industrial aluminium oxide sanding paper is “glue” bonded and suitable for use with hand sanding blocks and orbital sanders.
-
1/2- TONNE TRANSMISSION JACKRead moreKennedy Telescopic Transmission Jack
Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3â dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875 to 1800mm.
Contents TTJ500
Capacity…1/2 Tonne
Ram Extensions…2
Minimum Saddle Height…875mm
Maximum Saddle Height…1800mm
Saddle Size…680x810mm
Chain Length…95mm
Saddle Tilt Forward…24â
Saddle Tilt Back…19â
Saddle Tilt Side…+/- 20â
Saddle Return Weight…15.8kg (35lbs)
Base…695 x 805mm
Weight…68.5kg -
1/2-5/8″ (12-16mm) SIZE 2 NUT SPLITTERRead moreKennedy Nut Splitters
Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.
-
1/2-9/16″ PROF FLARE NUTRING SPANNERRead moreKennedy Professional Flared Nut Ring Spanners – AF
AF: Conform with ANSI B107.6
Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc. -
1/2″ (12.70mm) x 90 DEG 3FL S/S CARBIDE COUNTERSINKRead moreKennedy Solid Carbide High Performance Premium Countersinks – 3 Flute 90°
3 Flute 90°
For the general purpose countersinking of tool steel, cast irons, high silicon aluminium, bronze and non-metallic materials such as resin fibre glass and laminates. Available in 3 flute with eccentric relief and 6 flute with conventional relief. Manufactured to USCTI Standards. * Brazed steel shank -
1/2″ (12.70mm) x 90 DEG 6FL S/S CARBIDE COUNTERSINKRead moreSolid Carbide High Performance Premium Countersinks – 6 Flute 90°
6 Flute 90°
For the general purpose countersinking of tool steel, cast irons, high silicon aluminium, bronze and non-metallic materials such as resin fibre glass and laminates. Available in 3 flute with eccentric relief and 6 flute with conventional relief. Manufactured to USCTI Standards. * Brazed steel shank -
1/2″ (12mm) CHS COVENTRYDIE HEADRead moreWS Style Coventry Dies Head
Robust and reliable. Can be used on a variety of manual or automatic* machines. Can be supplied with any other straight or tapered shank. Takes standard Coventry type chasers. Repair parts readily available.
*Supplied with spring band closer. Set for single cut only. -
1/2″ & 3/4″ THREADED TAPCONNECTORRead moreUniversal Tap Connector
This male snap action connector can be attached to any tap with either a 1/2â or 3/4â BSP fitting.
-
1/2″ 2FL BALL NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003.