Archives: Products
Showing 881–896 of 23773 results
-
1/2″ 2FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Inch
2 Flute: Regular Series – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/2″ 3FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Inch
3 Flute: Regular Series – Inch
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/2″ 4FL STANDARD CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch
4 Flute: Regular Series – Inch
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/2″ A/F CHROME VANADIUMCOMB SPANNERRead moreKennedy Industrial Combination Spanners – AF
AF
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
1/2″ A/F DEEP IMPACT SKT1/2″ SQ DRRead moreChrome Molybdenum Impact Sockets: 1/2″ Drive Inch Size, Deep Length, 6-Point
1/2″ Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
1/2″ A/F DEEP IMPACT SKT3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Inch Size, Deep Length, 6-Point
3/8â Drive Inch Size, Deep Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
1/2″ A/F DEEP SOCKET 1/2″ SQ DRRead moreKennedy Bi-Hexagon Deep Sockets, 1/2″
Bi-Hexagon Sockets
12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
1/2″ A/F DEEP SOCKET 3/8″ SQ DRRead moreKennedy Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a
one-twelfth turn to engage the next point of the socket. -
1/2″ A/F DEEP SOCKET 3/8″ SQ. DRIVERead moreYamoto Bi-Hexagon Deep Sockets, 3/8″
Bi-Hexagon Sockets
12 point â side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Require only a one-twelfth turn to engage the next point of the socket. -
1/2″ A/F HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Inch – Standard Length
Inch – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
1/2″ A/F IMPACT SOCKET 1/2″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 1/2″ Drive Inch Size, Standard Length, 6-Point
1/2â Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
1/2″ A/F IMPACT SOCKET 3/8″ SQ DRRead moreKennedy Chrome Molybdenum Impact Sockets: 3/8″ Drive Inch Size, Standard Length, 6-Point
3/8â Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
-
1/2″ A/F LONG ARM HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches, Long Arm – Inch
Inch – Long Arm
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. -
1/2″ A/F PROFESSIONAL COMB WRENCHRead moreKennedy Professional Combination Spanners – AF
AF
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6. -
1/2″ A/F SINGLE HEX DEEPSOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – AF
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
1/2″ A/F SINGLE HEX SOCKET 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – AF
Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.