Archives: Products
Showing 929–944 of 23773 results
-
1/2″ FLAT WOOD BITRead moreKennedy Flat Bits
Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.
-
1/2″ HEXAGONAL PLASTIC PROTECTOR SLEEVERead moreKennedy Protector Sleeves
Contoured high impact resistant plastic grips redirects the force of miss-hits safely away from your hands preventing injury. Suitable for use with octagonal cold chisels.
-
1/2″ HOSE JOINERRead more13mm (1/2â) Hose Joiner
This fitting is used for either mending or joining hoses.
-
1/2″ HSS S/S BRIGHT JOBBER DRILLRead moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
1/2″ HSS S/S JOBBER DRILLRp1.233.000Read moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
1/2″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. -
1/2″ HSS S/S STUB DRILLRead moreHSS General Purpose Stub Drills – Imperial Sizes
Series S100 – Inch
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
1/2″ HSS T/S DRILLRp273.000Read moreGeneral Purpose HSS Taper Shank Drills, 1 Morse Taper – Inch Sizes
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.
-
1/2″ HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances
Diameter: up to 1 1/2â. Tolerance: +0.0025, -0.0005.
Diameter: Over 1 1/2â. Tolerance: +0.0050, -0.0000. -
1/2″ INDUSTRIAL PAINT BRUSHRead moreIndustrial Paint Brushes
Plastic handles. Chrome plated lapped and pressed ferrules. Pure bristles vulcanised in rubber. Designed to give excellent results at an affordable price. For DIY and trade use.
-
1/2″ LAMINATING BRUSHRead moreLaminating Brushes
Laminating brush for fibreglass and resin projects. White bristle, stainless ferrule. Cream plastic handle.
-
1/2″ MALE x 1/2″ FEMALE IMPACT UNIV JOINTRead moreKennedy Chrome Molybdenum Impact Sockets & Accessories: Universal Ball Joints
Universal Ball Joint
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
1/2″ MALE x 3/4″ FEMALE IMPACT REDUCERRead moreKennedy Chrome Molybdenum Impact Sockets & Accessories: Reducers & Adaptors
Reducers & Adaptors
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
1/2″ MALE x 3/8″ FEMALE IMPACT REDUCERRead moreKennedy Chrome Molybdenum Impact Sockets & Accessories: Reducers & Adaptors
Reducers & Adaptors
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
1/2″ NOZZLE POINTED STRAIGHT 1/2″ BORERead moreIndexa Modular Coolant Hose System – Nozzles
Nozzles
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT. -
1/2″ NPT FEMALE THREADEDSPIGOT 1/2″ BORERead moreIndexa Modular Coolant Hose System – Threaded Spigots
Threaded Spigots
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT.