Archives: Products
Showing 961–976 of 23773 results
-
1/2″ SQ DR x 380mm (15″)IMPACT EXT BARRead moreKennedy Chrome Molybdenum Impact Sockets & Accessories: Extension Bars
Extension Bars
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
1/2″ SQ DR x 5/16″ HEX SOCKET ADAPTORRead moreKennedy Hex Bit Adaptors, 1/2″
Chrome vanadium. For converting square drive tooling to use hexagon bits.
-
1/2″ SQ x 3″ COBALT TOOLBITRp398.000Read moreHSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ x 3″ HSS TOOLBITRp213.000Add to cartHSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ x 4″ COBALT TOOLBITRp507.000Read more
HSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ x 4″ HSS TOOLBITRp288.000Add to cart
HSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ x 6″ COBALT TOOLBITRp754.000Add to cart
HSS Cobalt Toolbits
5% Cobalt Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ x 6″ HSS TOOLBITRp428.000Read more
HSS Toolbits
HSS Square Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″ SQ. DR. ANGULAR TORQUE GAUGERead moreAngular Torque Gauges
The gauge has an easy to read 360° scale in 2°, 10° & 30° increments and has an Indicator etched into the clear plastic. An adjustable arm to keep the angled scale stationary, with a long and short side for flexibility in positioning against components.
-
1/2″ SQ. DR. FLEX HEAD RATCHET – STEEL HANDLERead moreLever Reversible Steel Handle Flexi-Joint, 1/2″
Fully chromed lever type. All steel handle. The hinged joint gives additional capability in areas of restricted access.
-
1/2″ SQ. DR. MECHANICS TORQUE WRENCH 25-150NMRead moreKennedy Adjustable Torque Wrenches
High quality chrome-plated, polished steel head and retractable torque setting lever. âClick and Snapâ action indicates when the pre-set torque level has been reached.
Four easy read scales Nm, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle. Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in a cardboard case.
Manufactured to ISO 6789 : 2003 (BS EN 26789 : 2003).
Accuracy = ±4%. -
1/2″ SQ. DR. MECHANICS TORQUE WRENCH 50-250NMRead moreKennedy Adjustable Torque Wrenches
High quality chrome-plated, polished steel head and retractable torque setting lever. âClick and Snapâ action indicates when the pre-set torque level has been reached.
Four easy read scales Nm, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle. Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in a cardboard case.
Manufactured to ISO 6789 : 2003 (BS EN 26789 : 2003).
Accuracy = ±4%. -
1/2″ SQ. DR. MECHANICS TORQUE WRENCH 70-350NMRead moreKennedy Adjustable Torque Wrenches
High quality chrome-plated, polished steel head and retractable torque setting lever. âClick and Snapâ action indicates when the pre-set torque level has been reached.
Four easy read scales Nm, kgf.m, lbf.in x10, lbf.ft. Push through square drive connector to instantly reverse action. Knurled grip plastic handle. Complete with factory tested calibration certificate, operating instructions and torque conversion chart. Supplied in a cardboard case.
Manufactured to ISO 6789 : 2003 (BS EN 26789 : 2003).
Accuracy = ±4%. -
1/2″ SQ. DR. Q/R 72T RATCHET HANDLE – RUBBERRead moreKennedy Lever Reversible Rubber Handle, 1/2″
Chrome vanadium. Rubber grip, 72 tooth ratchet. With thumb lever for reversing without having to remove the socket or accessory. With quick release. A high quality wrench for the professional user.
-
1/2″ SQ. DR. Q/R 72T RATCHET HANDLE – RUBBERRead moreYamoto Quick Release Ratchet Handle, 1/2″
With thumb lever for reversing without having to remove the socket or accessory. Highly polished chrome vanadium with rubber grip.
-
1/2″ SQ. DR. Q/R 72T RATCHET HANDLE – STEELRead moreKennedy Lever Reversible Steel Handle, 1/2″
Fully chromed all steel handle with thumb lever for reversing without having to remove the socket or accessory.