Archives: Products
Showing 1073–1088 of 23773 results
-
1/2″x20 UNFx1.1/2″ O/D HSS DIERp431.000Read moreUNF (Unified Fine) HSS Ground Thread Dies
ISO 529
For use in diestocks to produce external screw threads. -
1/2″x20 UNFx1.5/16″ O/D HSS DIERp245.000Read moreUNF (Unified Fine) HSS Ground Thread Dies
ISO 529
For use in diestocks to produce external screw threads. -
1/2″x3/4″ BASIN WRENCHRead moreKennedy Back Spanner Basin Wrench
Back Spanner Basin Wrenches
For use in vertical or horizontal confined spaces. Grips on smooth and oily surfaces. Double ended wrench for 13mm (1/2â) and 32mm (11/4â) lavatory and basin nuts. Made from cast iron. -
1/2″x3/4″x4″ RECTANGULAR 5% COBALT TOOLBITRead moreHSS Cobalt Toolbits
5% Cobalt Rectangular Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″x3/4″x6″ RECTANGULAR 5% COBALT TOOLBITRead more
HSS Cobalt Toolbits
5% Cobalt Rectangular Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″x3/8″x16TPI T-SLOT MACHINE CLAMP SETRead moreAtlas T-Slot Steel Clamping Sets – Inch
58 Pieces Inch Sets (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box). -
1/2″x5/8″ BRICK JOINTERRead moreKennedy Double Ended Brick Jointer
Heavy duty steel. Used to produce 1/2â and 5/8â concave joints between bricks.
-
1/2″x5/8″x6″ RECTANGULAR 5% COBALT TOOLBITRead more
HSS Cobalt Toolbits
5% Cobalt Rectangular Inch
Cut faster, ‘stand up’ longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). -
1/2″x9/16″ A/F DOUBLE END BOX SPANNERRead moreKennedy Box Spanners – AF
AF
Manufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. -
1/2″x9/16″ OFFSET RATCHET RING SPANNERRead moreKennedy Reversible Ratchet Ring Wrenches, 25° Offset – AF
25° Offset: AF
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.
*Single hexagon -
1/2″x9/16″ STRAIGHT RATCHET RING WRENCHRead moreReversible Ratchet Ring Wrenches, Straight – AF
Straight: AF
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings. -
1/2BSFx1 SKT HEAD C/SUNK SCREW (10.9)Read moreQualfast Socket Head Countersunk Screws, Inch: BSF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to BS 2470 -
1/2BSFx1 SKT HEAD CAP SCREW (12.9)Read moreQualfast Socket Head Cap Screws, Inch: BSF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS 2470 -
1/2BSFx1 SKT SET SCREW KNURLED (14.9)Read moreQualfast Socket Set Screws, Inch: BSF – Standard (Self-Colour) – Knurled Cup
High tensile alloy steel. Grade 14.9. BS 2470.
For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above 1/4â are generally counterbored to provide maximum clamping efficiency. -
1/2BSFx1.1/2 SKT HEAD C/SUNK SCREW (10.9)Read more
Qualfast Socket Head Countersunk Screws, Inch: BSF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact.
Dimensions to BS 2470 -
1/2BSFx1.1/2 SKT HEAD CAP SCREW (12.9)Read more
Qualfast Socket Head Cap Screws, Inch: BSF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C.
Dimensions to BS 2470