Archives: Products
Showing 1217–1232 of 23773 results
-
1/32″ HSS S/S JOBBER DRILLRead moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
1/32″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. -
1/4 TORQ SET 1/4″ HEX 25mm O/ARead moreKennedy Screwdriver Bits: 1/4â Hex Drive Bits – Torq® Sets
Torq® Sets
All Kennedy screwdriver bits have a hardness of 58 – 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. -
1/4 UNCx1 SKT BUTTON HEADSCREW (10.9)Read moreQualfast Socket Head Button Screws: UNC – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNCx1/2 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNC – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNCx3/4 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNC – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNCx3/8 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNC – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNCx5/8 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNC – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNFx1 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNFx1/2 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4 UNFx3/4 SKT BUTTON HEAD SCREW (10.9)Read more
Qualfast Socket Head Button Screws: UNF – Standard (Self-Colour)
High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9.
Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners.
UNC/UNF Dimensions to ANSI B 18.3
BSW/BA Dimensions to BS 2470 -
1/4-1″ A/F PROF COMBINATION SPANNER SET 13PCRead moreKennedy Professional Combination Spanners – AF
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6.
Sets
9 Piece AF: 1/4â, 5/16â, 3/8â, 7/16â, 1/2â, 9/16â, 5/8â, 11/16â and 3/4â.
13 Piece AF: 1/4â, 5/16â, 3/8â, 7/16â, 1/2â, 9/16â, 5/8â, 11/16â, 3/4â, 13/16â, 7/8â, 15/16â and 1â.
14 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
18 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22, and 24mm.
14* Piece Metric: 6, 8, 9, 10, 13, 14, 15, 17, 19, 22, 24, 27, 30 and 32mm.
26 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 and 32mm. -
1/4-1″AF CV COMBINATION SPANNER SET 12PCRead moreKennedy Spanner Sets
Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4 inch – 1 inch, AF – DIN 3113.
26mm – 50mm, 11/16 inch – 2 inch, AF – ASME B107.6. -
1/4-1″AF CV OPEN END SPANNER SET 10PCRead moreKennedy Industrial Open Ended Spanners – Sets
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth.Sets:
5 Piece AF: 1/4â x 5/16â, 3/8â x 7/16â, 1/2â x 9/16â, 5/8â x 11/16â and 3/4â x 7/8â.
10 Piece AF: 1/4â x 5/16â, 5/16â x 3/8â, 3/8â x 7/16â, 7/16â x 1/2â, 1/2â x 9/16â, 9/16â x 5/8â, 5/8â x 11/16â, 11/16â x 3/4â, 3/4â x 7/8â and 15/16â x 1â.
8 Piece Whitworth: 1/8â x 3/16â, 3/16â x 1/4â, 1/4â x 5/16â, 5/16â x 3/8â, 3/8â x 7/16â, 7/16â x 1/2â, 1/2â x 9/16â and 9/16â x 5/8â.
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.
8 Piece Metric: 24 x 26, 25 x 28, 27 x 30, 27 x 32, 32 x 36, *36 x 41, *41 x 46 and *46 x 50mm. -
1/4-1″AF CV RING SPANNERSET 10PCRead moreKennedy Double Ended Ring Spanners – Sets
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.
Sets
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″.
10 Piece AF: 1/4″ x 5/16″, 5/16″ x 3/8″, 3/8″ x 7/16″, 7/16″ x 1/2″, 1/2″ x 9/16″, 9/16″ x 5/8″, 5/8″ x 11/16″, 11/16″ x 3/4″, 3/4″ x 7/8″ and 15/16″ x 1â.
5 Piece BSW: 3/16″ x 1/4″, 5/16″ x 3/8″, 7/16″ x 1/2″, 9/16″ x 5/8″ and 11/16″ x 3/4″ BSW.
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm. -
1/4-3/4″AF CV COMBINATION SPANNER SET 9PCRead moreKennedy Spanner Sets
Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4 inch – 1 inch, AF – DIN 3113.
26mm – 50mm, 11/16 inch – 2 inch, AF – ASME B107.6.