Archives: Products
Showing 1233–1248 of 23773 results
-
1/4-7/8″AF CV OPEN END SPANNER SET 5PCRead moreKennedy Industrial Open Ended Spanners – Sets
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110: 4 x 5mm to 32 x 36mm, 1/4â x 5/16â to 1 5/16â x 1 5/8â AF.
ASME B107.39: 36 x 41mm to 46 x 50mm, 1 7/16â x 1 5/8â to 1 13/16â x 2â AF.
DIN 3110 & BS192:1982: 1/8â x 3/16â to 1â x 1 1/8â Whitworth.Sets:
5 Piece AF: 1/4â x 5/16â, 3/8â x 7/16â, 1/2â x 9/16â, 5/8â x 11/16â and 3/4â x 7/8â.
10 Piece AF: 1/4â x 5/16â, 5/16â x 3/8â, 3/8â x 7/16â, 7/16â x 1/2â, 1/2â x 9/16â, 9/16â x 5/8â, 5/8â x 11/16â, 11/16â x 3/4â, 3/4â x 7/8â and 15/16â x 1â.
8 Piece Whitworth: 1/8â x 3/16â, 3/16â x 1/4â, 1/4â x 5/16â, 5/16â x 3/8â, 3/8â x 7/16â, 7/16â x 1/2â, 1/2â x 9/16â and 9/16â x 5/8â.
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.
8 Piece Metric: 24 x 26, 25 x 28, 27 x 30, 27 x 32, 32 x 36, *36 x 41, *41 x 46 and *46 x 50mm. -
1/4-7/8″AF CV RING SPANNER SET 5PCRead moreKennedy Double Ended Ring Spanners – Sets
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.
Sets
5 Piece AF: 1/4″ x 5/16″, 3/8″ x 7/16″, 1/2″ x 9/16″, 5/8″ x 11/16″ and 3/4″ x 7/8″.
10 Piece AF: 1/4″ x 5/16″, 5/16″ x 3/8″, 3/8″ x 7/16″, 7/16″ x 1/2″, 1/2″ x 9/16″, 9/16″ x 5/8″, 5/8″ x 11/16″, 11/16″ x 3/4″, 3/4″ x 7/8″ and 15/16″ x 1â.
5 Piece BSW: 3/16″ x 1/4″, 5/16″ x 3/8″, 7/16″ x 1/2″, 9/16″ x 5/8″ and 11/16″ x 3/4″ BSW.
7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm. -
1/4,3/8,&1/2 SQ.DR. mm/TX SOCKET/SPANNER SET 208PCRead moreCombined Socket & Wrench Tool Kit
The Senator 208 Piece Combined Socket and Wrench Tool Kit comes with a plastic storage case.
Contents:
1/2″ drive sockets: 13 – 32mm.
Drive deep sockets: 16 to 22mm.
E-Sockets: 20, 22, 24mm.
Screwdriver bits: Hex 14mm, TX 70.
Converters: 1/2″ sq. male x 3/8″ sq. female.
Accessories: 125, 250mm extensions bars, 1/2″ drive universal joint, T-bar, quick release offset bi-material ratchet handle.3/8″ drive sockets: 10 – 19mm.
Deep sockets: 10 – 15mm.
Spark plug sockets: 16, 18, 21mm.
E-Sockets: 10 – 18mm.
Screwdriver bits: Slotted 6 – 12. PZ No. 1, 2, 3. Crosspoint No.1, 2, 3, 4. Hex 6 – 12mm. TX 40 – 60. Tamper Proof TX 40 – 60. Spline 5, 6, 8.
Converters: 3/8″ sq. female x 5/16″ Hex Drive, 3/8″ sq. female x 1/4″ sq. male.
Accessories: 75mm extension bar, universal joint, quick release offset bi-material ratchet handle.1/4″ drive sockets: 4 – 14mm.
Deep sockets: 4 – 10mm.
E-Sockets: 4 – 8mm.
Screwdriver bits: Slotted 4 – 7mm. PZ No.0, 1, 2. Crosspoint No.0, 1, 2, TX 8 – 30. Tamperproof TX 8 – 30. Hex 3 – 6mm.
Converters: 1/4″ sq. female x 1/4″ Hex Drive.
Accessories: 50, 100mm extension bars, universal joint, T-bar, nut spinner handle, quick release offset bi-material ratchet handle.Combination spanners: 8 – 19mm.
Hex key wrenches: 1.5, 2.0, 2.5mm.
Magnetic bit: 1/4″ Hex Driver.
Screwdriver bits: 1/4″ Hex Driver.
Converter: 2x 1/4″ sq. male, Slotted 2x 3.5, 4mm 1x 5.5, 6.5, 8mm,
PZ No.1, 2, 3, Crosspoint 2x No.0, 1, 2, 3, TX 10, 15, 20, 25, 27, 30, 40, Tri-Wing No.1, 2, 3, 4, Square 1, 2 ,3, Hex 2, 3, 4, 5, 6, 7mm. -
1/4″ (6.30mm) x 90 DEG 3FL S/S CARBIDE COUNTERSINKRead moreKennedy Solid Carbide High Performance Premium Countersinks – 3 Flute 90°
3 Flute 90°
For the general purpose countersinking of tool steel, cast irons, high silicon aluminium, bronze and non-metallic materials such as resin fibre glass and laminates. Available in 3 flute with eccentric relief and 6 flute with conventional relief. Manufactured to USCTI Standards. * Brazed steel shank -
1/4″ (6.30mm) x 90 DEG 6FL S/S CARBIDE COUNTERSINKRead moreSolid Carbide High Performance Premium Countersinks – 6 Flute 90°
6 Flute 90°
For the general purpose countersinking of tool steel, cast irons, high silicon aluminium, bronze and non-metallic materials such as resin fibre glass and laminates. Available in 3 flute with eccentric relief and 6 flute with conventional relief. Manufactured to USCTI Standards. * Brazed steel shank -
1/4″ (6mm) CHS COVENTRY DIE HEADRead moreWS Style Coventry Dies Head
Robust and reliable. Can be used on a variety of manual or automatic* machines. Can be supplied with any other straight or tapered shank. Takes standard Coventry type chasers. Repair parts readily available.
*Supplied with spring band closer. Set for single cut only. -
1/4″ 2FL BALL NOSE CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 2 Flute – Regular Series, Inch
Regular Series – 2 Flute – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Inch Tolerances
Diameter: Over 1/16″ ~ up to 1/4″. Tolerance: +0.000, -0.002.
Diameter: Over 1/4″ ~ up to 1″. Tolerance: +0.000, -0.003. -
1/4″ 2FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 2 Flute: Regular Series, Inch
2 Flute: Regular Series – Inch
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/4″ 3FL BALL NOSE CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Slot Drills Ball Nosed, 3 Flute – Regular Series, Inch
Regular Series – 3 Flute – Inch
Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Chatter is also significantly reduced. Centre cutting as standard. Manufactured to Ansi Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/4″ 3FL STANDARD CARBIDE SLOT DRILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 3 Flute: Regular Series, Inch
3 Flute: Regular Series – Inch
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/4″ 4FL STANDARD CARBIDE END MILLRead moreKennedy Carbide Micrograin Plain Shank Milling Cutters, 4 Flute: Regular Series, Inch
4 Flute: Regular Series – Inch
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.Inch Tolerances
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.000, -0.002.
Diameter: Over 1/4â ~ up to 1â. Tolerance: +0.000, -0.003. -
1/4″ A/F CHROME VANADIUMCOMB SPANNERRead moreKennedy Industrial Combination Spanners – AF
AF
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm – 25mm, 1/4″ – 1″ AF – DIN 3113.
26mm – 50mm, 11/16″ – 2″AF – ASME B107.6.
1/8″ – 1/2″ Whitworth – DIN 3113 & BS192:1982.
9/16″ – 7/8″ Whitworth – ASME B107.6 & BS192:1982. -
1/4″ A/F HEX SOCKET BIT 1/4″ SQ DRRead moreKennedy Bi-Hexagon Sockets, 1/4″ – Screwdriver Bits
Screwdriver Bits
Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.
Overall length: 37mm.
Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
-
1/4″ A/F HEXAGON BALL DRIVERRead moreKennedy Hexagon Ball Drivers – Inch
Inch
Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. -
1/4″ A/F HEXAGON L-WRENCH BALL DRIVERRead moreKennedy Ball Driver L-Wrenches – Inch
Inch
Manufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball drive and short arm end plain. Black oxidised finish. -
1/4″ A/F HEXAGON WRENCHRead moreKennedy Hexagon Key L-Wrenches: Inch – Standard Length
Inch – Standard Length
Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.