Archives: Products
Showing 1313–1328 of 23773 results
-
1/4″ HEXx6.0mmx25mm TITANIUM SCREWDRIVER BITRead moreTitanium Screwdriver Bits: 1/4″ Hex Bits – Hex
Hex
Titanium bits improve wear resistance, protect gripping points from the rigors of repetitive use. For use with hand and power tools. -
1/4″ HEXx8.0mmx25mm TITANIUM SCREWDRIVER BITRead moreTitanium Screwdriver Bits: 1/4″ Hex Bits – Hex
Hex
Titanium bits improve wear resistance, protect gripping points from the rigors of repetitive use. For use with hand and power tools. -
1/4″ HSS S/S BRIGHT JOBBER DRILLRp288.000Read moreHSS Jobber Drills Metric, Bright Finish – Inch
Series J100 – Inch
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328/DIN338RN.Bright Finish
Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials. -
1/4″ HSS S/S JOBBER DRILLRp288.000Read moreHSS Jobber Drills Steam Tempered – Inch
Series J100
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining. -
1/4″ HSS S/S L/S DRILLRead moreHSS Straight Shank Long Series Drills
General purpose high speed steel long series drills are designed for deep hole drilling of most materials.
The drill has the same diameter on both the fluted section and the shank.
Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494. -
1/4″ HSS S/S STUB DRILLRead moreHSS General Purpose Stub Drills – Imperial Sizes
Series S100 – Inch
General purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° – 20°, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BSâ328: Part 1: 1986/DIN 1897. -
1/4″ HSS T/S DRILLRp190.000Read moreGeneral Purpose HSS Taper Shank Drills, 1 Morse Taper – Inch Sizes
Suitable for single and multi-spindle drilling machines. The taper shank being the engineering industries recognised standard and most widely used method for holding and driving cutting tools. Manufactured to BS 328 : Part 1 : 1986, DIN 345RN, DIN 343RN.
-
1/4″ HSS-COBALT KC3 THROWAWAY CUTTERRead moreKennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Inch – Uncoated
Short Series – Inch
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4â,
Inch Tolerances:
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.0005, -0.0013.Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
-
1/4″ HSS-COBALT L/S KC3 THROWAWAY CUTTERRead moreKennedy HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Inch – Uncoated
Long Series – Inch
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
*Except: 1mm cutters, 2mm and 1/16″ ball nose cutters, all of which have two flutes.Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank Diameter: 1/4â.
Inch Tolerances:
Diameter: Over 1/16â ~ up to 1/4â. Tolerance: +0.0005, -0.0013.Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
-
1/4″ HSS-COBALT SC/SH END MILLRead moreSherwood HSS-Co 5% Threaded Shank End Mills Multi Flute, Regular Series – Inch
Regular Series Type E411T
Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.
Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances
Diameter: up to 1 1/2â. Tolerance: +0.0025, -0.0005.
Diameter: Over 1 1/2â. Tolerance: +0.0050, -0.0000. -
1/4″ MALE x 3/8″ FEMALE IMPACT REDUCERRead moreKennedy Chrome Molybdenum Impact Sockets & Accessories: Reducers & Adaptors
Reducers & Adaptors
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. -
1/4″ MESH RIDDLERead moreRutland 1/4â Mesh Riddle
For bringing soil to a suitable condition, removing large lumps to provide the perfect potting soil, according to size. Made of steel mesh.
Diameter: 360mm. Depth: 70mm. -
1/4″ NOZZLE POINTED STRAIGHT 1/2″ BORERead moreIndexa Modular Coolant Hose System – Nozzles
Nozzles
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT. -
1/4″ NOZZLE POINTED STRAIGHT 1/4″ BORERead moreIndexa Modular Coolant Hose System – Nozzles
Nozzles
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT. -
1/4″ NPT FEMALE THREADEDCONNECTOR 1/4″ BORERead moreIndexa Modular Coolant Hose System – Threaded Spigots
Threaded Spigots
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT. -
1/4″ NPT MALE THREADED SPIGOT 1/4″ BORERead moreIndexa Modular Coolant Hose System – Threaded Spigots
Threaded Spigots
Modular coolant hose system is ideal for coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable if a single section is damaged. Manufactured from acetal – non-conductive and chemical resistant. Available with 1/4â, 1/2â and 3/4â bore. Hose is green, all other fittings are orange. Threaded fittings are fully compatible with BSPT.