Relaunch Promotion
Product Showcase
0.7-1.5″ DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Out of stock
SKU : OXD3151000K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 7 1/2″
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 0.7-1.5″
UNSPSC Code : 41111600
Weight each : 0.53kg
| Weight | 1 kg |
|---|
Related products
-
AUTO RANGE DIGITAL MULTIMETER 1000V DC 750V ACRead moreEdison Auto Range Digital Multimeters – DAM075
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
DAM075
The 2 in 1 digital multimeter is capable for the following tasks: electrical testing using test probes, no contact voltage detection and testing for wiring faults.
Testing temperature: -20 to 1000°C.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 40MW.
Capacitance: 200mF.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function. Auto power OFFâ and low power indicator.
Digital display count: 3999.
Pack includes: digital multimeter, test probes, temperature sensor probe, DC1.5V x3 AAA batteries (installed), instruction manual
Dimensions (W x D x H): 152 x 45 x 190mm. -
PLUNGER DIAL GAUGE 0.5×0.001″x0-50-0Read moreKennedy Easy Read Dial Gauges Plunger Type
58mm (2 1/4â) Diameter Dial
Easy Read Dial Gauges and DTIâs are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, âEasy Readâ dial for zero
setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands.
Fitted with 1/4â inside diameter centre back lug and 5/16â diameter stem. Manufactured to BS 907. -
RELATIVE HUMIDITY & TEMPERATURE TESTERRead moreEdison Relative Humidity & Temperature Tester
THM150
This multimeter is ideal for temperature, humidity and dew point testing in residential and commercial environments such as offices, storeroomâs, greenhouses and places where a
controlled environment is essential.
Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.
Meter capabilities:
⢠Testing temperature: -10 ~ 50°C (14 to 122°F).
⢠Testing humidity: 0 ~ 100%RH.
⢠4 digit clear LCD display with optional back light.
⢠Data hold function.
⢠Auto power âOFFâ and low power indicator.
⢠Battery operated – DC1.5V 3x AAA (included).Functions: Data hold, LCD display with optional backlight and Auto power-off.
Pack includes: Meter, head cover, wrist strap, carry case, DC1.5V x 3 AAA batteries
(installed). Instruction manual.
Dimensions (W x D x H): 60 x 30 x 121mm.
Gross weight: 140g. -
REPLACEMENT PROBE FOR EDI5163400KRead moreReplacement Probe
Replacement Probe for Edison DAM982 Digital Multimeter (EDI-516-9020K)