Relaunch Promotion
Product Showcase
1.4-2.4″ DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Out of stock
SKU : OXD3151050K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 9″
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 1.4-2.4″
UNSPSC Code : 41111600
Weight each : 0.90kg
| Weight | 1 kg |
|---|
Related products
-
3-IN-1 MULTIMETER & NETWORK MAINTENANCE TESTERRead moreEdison Auto Range Digital Multimeters – MNT070
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
MNT070
The 3 in 1 digital multimeter is capable of testing the following: network cable testing, line testing (RJ11), DMM testing.
AC/DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 200MW.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function. Pack includes: network digital multimeter, test probes, TJ45 jack (remote), 9V battery (installed), instruction manual.
Dimensions (W x D x H): 165 x 65 x 230mm. -
ELECTRONIC TACHOMETERRead moreEdison Electronic Tachometer
TNC150
Precise red LED light source (laser beam) together with a reflective strip, non-contact measurements can be made safely up to 40cm (15 3/4″) from the target. For measuring in rpm and rps.Testing range: 100 to 30000rpm/1.7 to 500rps.
6 digit clear LCD display with optional back light. Data hold function. Auto power ‘OFF’ & low power indicator. Battery operated: DC1.5V 3x AAA (included).
Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.Pack includes: Digital Tachometer. 2x 30cm Reflective Strips. Wrist strap. Hard carry case. DC1.5V x3 AAA batteries (installed). Instruction manual.
Picture descriptions:
Actual size of LCD
Test for regular rotary speed
Laser beam accuracy
Complete with protective head cover -
DAM332 POCKET DIGITAL MULTIMETERRead moreDigital Multimeter – DM332
DAM332
Pocket sized with integral lead storage. Features include continuity, diode, reading/peak hold, fused current range, auto power off, overload indication, low battery indication.
Voltage max: 600V AC, 600V DC.
Current max: 400mA AC/DC.
Resistance max: 40MW.
Safety rating: Cat II.
Warranty: 1 year.
Supplied with wallet. -
DM383 DIGITAL MULTIMETERRead moreDigital Multimeter – DM383
DM383
Features include continuity, transistor hFE, reading/peak hold, fused current range, auto power off, overload indication, low battery indication, tilt stand/hanger.
Voltage max: 600V AC, 600V DC.
Current max: 10A DC.
Resistance max: 2MW.
Safety rating: Cat II.
Warranty: 1 year. Supplied with holster.