Relaunch Promotion
Product Showcase
3D ANALOGUE TESTER
Kennedy 3D Axis Gauge
The New Generation of NC axis gauging equipment, for quick, accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC or DRO and also for EDM/spark erosion tools – the stylus is electrically insulated from the spindle. Universal – one tool measures length, height, diameter and centre. The synchronous single needle allows greater needle displacement before reaching â12 o’clockâ. A positive reading is given regardless of direction of axis movement. No calculations and no âtrial and error’ involved. Increases production and efficiency, reduces job time and operator requirement. The stylus is designed to break on a ânominal fracture’ before the workpiece or tester can be damaged. Three plug in styli types can be changed in seconds without the use of special tools.
Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 16mm.
a. Measuring length
b. Measuring height
c. Establishing true centre and diameter of bores.
Insert stylus roughly in centre of bore, measure distance A and divide by 2 (P). Measure distance B in Y direction, across point P and divide by 2.
Result: true centre point (M).
Repeat measuring of distance A.
Out of stock
SKU : KEN3022010K
Kennedy 3D Axis Gauge
The New Generation of NC axis gauging equipment, for quick, accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC or DRO and also for EDM/spark erosion tools – the stylus is electrically insulated from the spindle. Universal – one tool measures length, height, diameter and centre. The synchronous single needle allows greater needle displacement before reaching â12 o’clockâ. A positive reading is given regardless of direction of axis movement. No calculations and no âtrial and error’ involved. Increases production and efficiency, reduces job time and operator requirement. The stylus is designed to break on a ânominal fracture’ before the workpiece or tester can be damaged. Three plug in styli types can be changed in seconds without the use of special tools.
Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 16mm.
a. Measuring length
b. Measuring height
c. Establishing true centre and diameter of bores.
Insert stylus roughly in centre of bore, measure distance A and divide by 2 (P). Measure distance B in Y direction, across point P and divide by 2.
Result: true centre point (M).
Repeat measuring of distance A.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 27209005
Effective Length : 125mm
Indicator Diameter : 50mm
Shank Diameter : 16mm
Supplier Part No. : 106000-2mm
UNSPSC Code : 41111920
Weight each : 89g
| Weight | 1 kg |
|---|
Related products
-
AUTO RANGE DIGITAL CLAMPMETER 1000A AC/DCAdd to cartEdison Auto Range 1000A AC/DC Digital Clamp Meters – DCM070
Edison⢠multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters.
DCM070
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power âOFFâ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle,
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606g -
AIRFLOW, VELOCITY & TEMPERATURE TESTERRead moreEdison Airflow, Velocity & Temperature Tester
TVA150
This meter is for measuring airflow and temperature. It is ideally used to measure the air speed at ventilation outlets and to test temperatures in residential and commercial environments such as offices, storeroomâs, greenhouses and places where climate conditions can be analysed. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.
Meter capabilities:
⢠Measuring wind/airflow in: m/s, km/h, fpm, mph, kts.
⢠Beaufort scale.
⢠Temperature in both °C and °F.
Testing ranges: 0.4 ~ 20m/s, 80 ~ 4000fpm, -10 ~ 50°C (14 ~ 122°F).
⢠4 digit clear LCD display with optional back light.
⢠Data hold function.
⢠Auto power âOFFâ and low power indicator.
⢠Battery operated – DC1.5V 3x AAA (included). -
PLUNGER DIAL GAUGE 0.5×0.001″x0-50-0Read moreKennedy Easy Read Dial Gauges Plunger Type
58mm (2 1/4â) Diameter Dial
Easy Read Dial Gauges and DTIâs are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, âEasy Readâ dial for zero
setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands.
Fitted with 1/4â inside diameter centre back lug and 5/16â diameter stem. Manufactured to BS 907. -
DAM668 DIGITAL MULTIMETERAdd to cartDigital Multimeter – DAM668
DAM668
Removable rubber holster with integral lead holders. Features include continuity, diode, transistor hFE, auto ranging, reading/peak hold, bar graph, fused current range, overload indication, low battery indicator, tilt stand/hanger.
Voltage max: 700V AC, 1000V DC.
Current max: 10A AC/DC.
Resistance max: 32.6MW.
Capacitance max: 32.6mF.
Frequency max: 150kHz.
Safety rating: Cat III 600V, Cat II 1000V.
Warranty: 1 year.