Relaunch Promotion
Product Showcase
50-150mm DIAL BORE GAUGE
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
SKU : OXD3151500K
Oxford Dial Indicating Bore Gauges
29mm 1 1/8â Dial Diameter
Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. For workshop and inspection use. All models have one fixed and one moving anvil and a self-adjusting centre shoe. A âdatum pointâ can be set by using a setting ring of a known diameter or a micrometer. â Zeroâ the gauge to this datum point by rotating the bezel to align âzeroâ with the indicator. To check a bore is within tolerance, the limit hands can be fixed as required. All anvils are spring loaded to expand into the bore. For accurate reading ensure the stem of the gauge is parallel to the axis of the bore. This can be checked by ârockingâ the gauge back and forth until the smallest diameter is found. All models have inter-changeable anvils to cover a range of bore sizes.
Supplied in a tough hard case.
Type – Metric
Graduation: 0.01mm
Face Dial: 57mm
Reading: 0-100
Travel Per Rev: 1mm
Total Travel: 3mm
Type – Inch
Graduation: 0.0005″
Face Dial: 2 3/16″
Reading: 0-25-0
Travel Per Rev: 0.050″
Total Travel: 0.25″
Specification :
Bore Depth : 240
Brand : Oxford Precision
eCl@ss Code : 21170308
Range : 50-150
UNSPSC Code : 41111600
Weight each : 1.28kg
| Weight | 1 kg |
|---|
Related products
-
INFRARED THERMOMETERRead moreEdison Infrared Laser Thermometer with Laser Targetting
IRT537
A high resolution infrared laser thermometer suitable for a wide range of industrial applications, HVAC and automotive diagnostics. The laser targeting enables accurate readings by guiding the user to the optimum measuring distance. Ideally suited for work in confined spaces and where accuracy is required such as on circuit boards, air-con units or in engine compartments. Simply aim at the target object, pull the trigger mechanism and read the current surface temperature from the LCD display. If necessary the laser can be activated via the laser button for more accurate targetting.
Temperature is displayed on back-lit LCD display and features hold function for ease of use.
Measurement range: -20C to 537C.
Accuracy: -20C to 50C /- 2.5C 51C to 537C /-(Reading x 1% 1C).
D/S ratio: 12:1.
Emissivity: 0.95.
Celsius/Fahrenheit display selection.
Back light display.
Power source: 9V battery.
Average/maximum/minimum/maximum-minimum mode selection.
Complies with EN61326:1997/A1:1998/ A2:2001/A3:2003.
Dimensions (L x W x H): 162 x 56 x 190mm.
Nett weight: 270g. -
AUTO RANGE DIGITAL MULTIMETER 1000V DC 750V ACRead moreEdison Auto Range Digital Multimeters – DAM075
Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters. Ideal for electrical troubleshooting and straightforward environmental testing in residential and commercial environments.
DAM075
The 2 in 1 digital multimeter is capable for the following tasks: electrical testing using test probes, no contact voltage detection and testing for wiring faults.
Testing temperature: -20 to 1000°C.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 10A.
Resistance: 40MW.
Capacitance: 200mF.
Relative measurement function. Diode testing facility. Clear display with LED back light and data hold function. Auto power OFFâ and low power indicator.
Digital display count: 3999.
Pack includes: digital multimeter, test probes, temperature sensor probe, DC1.5V x3 AAA batteries (installed), instruction manual
Dimensions (W x D x H): 152 x 45 x 190mm. -
AUTO RANGE DIGITAL CLAMPMETER 1000A AC/DCAdd to cartEdison Auto Range 1000A AC/DC Digital Clamp Meters – DCM070
Edison⢠multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison⢠range of multimeters you will find direct reading multimeters and non-contact reading multimeters.
DCM070
Ideal for electrical troubleshooting & testing in commercial environments. The AC/DC digital multimeter is capable of testing for the following: telephone networks, fuse connections.
AC voltage: 750V.
DC voltage: 1000V.
AC/DC current: 1000A
Resistance: 60MW.
Frequency: 100kHz.
Frequency from clamp: 400Hz.
Diode testing facility, continuity buzzer, clear display with LED backlight & data hold function, auto power âOFFâ & low power indicator, auto range facility, 4 segments bar graph.
Digital display count: 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.
Pack includes: digital clamp multimeter, test probes, 3x DC1.5V AAA batteries (installed), instruction manual, protective case with carry handle,
Dimensions (W x D x H): 140 x 58 x 260mm.
Weight: 606g -
DM664 DIGITAL MULTIMETERRead moreDigital Multimeter – DM664
DM664
Extra large digits, temperature probe and short lead capacitor adaptor. Features include continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.
Voltage max: 700V AC, 1000V DC.
Current max: 10A AC/DC.
Resistance max: 200MW.
Capacitance max: 2mF.
Frequency max: 20kHz.
Temp max: -20 to 1000°C.
Safety rating: Cat III 600V, Cat II 1000V.
Warranty: 1 year.