Relaunch Promotion
Product Showcase
SLIDE HAMMER/PULLER SET (16-PCE)
Kennedy Slide Hammer Puller Set
Multi-function
Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight.
Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.
Contents: 1x T-bar. 1x hammer. 1x two jaw head. 1x three jaw head. 1x leg locking nut. 1x grip wrench adaptor. 1x tapping adaptor and hook. 2x axle pullers. 3x 120mm puller legs, 3x screw and nut assemblies. 1x blow moulded storage case.
Out of stock
SKU : KEN5033480K
Kennedy Slide Hammer Puller Set
Multi-function
Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight.
Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.
Contents: 1x T-bar. 1x hammer. 1x two jaw head. 1x three jaw head. 1x leg locking nut. 1x grip wrench adaptor. 1x tapping adaptor and hook. 2x axle pullers. 3x 120mm puller legs, 3x screw and nut assemblies. 1x blow moulded storage case.
Specification :
Brand : Kennedy Industrial
eCl@ss Code : 21043090
Model Number : SHP8
Overall Depth : 110
Overall Length : 610
Overall Weight : 7.87
Overall Width : 210
UNSPSC Code : 27111712
Weight each : 8.20kg
| Weight | 1 kg |
|---|
Related products
-
LONG HANDLED GASKET SCRAPER SET (3-PCE)Read moreKennedy Gasket Scraper Set
Long Handled Gasket Scraper Set
For cleaning cylinder heads and removing old sealants and carbon build up. Hardened and tempered carbon steel shanks and heads are âoffset to edgeâ to allow easy scraping of flat surfaces. Simple âfirmerâ style bevelled points with longer head lengths allow for scrapers to be re-ground several times for maximum service life. Impact resistant square section handle for secure grip even when greasy.
Set includes blade widths: 19mm (3/4â), 25mm (1â) and 38mm (1 1/2â).
Overall length: 280mm (11â). -
BALL JOINT SERVICE TOOL SET WITH 4X4 ADAPTORRead moreKennedy Ball Joint Servicing Kit
Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.
Set Includes all the receive tubes and removing/installing adapters needed for press fit parts such as ball joints, universal joints and truck brake anchor pins.This tool kit is designed for servicing universal joints on all cars and light trucks that have press-fit type ball jointswithout the need to remove the control arm from the vehicle
Contents:
1 x C-frame press and Forcing Screw.
3 x Receiver tubes: 2-3/4″ x 3″ / 2-1/4″ x 2-1/2″ / 1-3/4″ x 2″
Installation/Removal Adaptor & Cups
4-wheel drive ball joint service kit for 1967-present 1/2 & 3/4 ton vehicles with Dana 44 front axle, (eg: Ford, GM, Dodge, IHC & Jeep). -
GLOW PLUG CONNECTOR PLIERS ANGLED JAWRead moreKennedy Professional Glow Plug Connector Pliers
Suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines. Made from chrome vanadium steel. Composite handle provides added comfort and control. Blade length: 125mm.
-
DOUGHNUT STRETCHERRead moreKennedy Exhaust Doughnut Puller
To enable fast Installation or removal of rubber anti-vibration mounting rings found on modern exhaust systems. Puller has offset hook for easier application and dipped vinyl handle for added comfort and extra grip. Manufactured from hardened steel. Length: 290mm